1. Punch or fix the water purifier at the selected position. Holes should be smooth, accurate in depth and spacing, and there should be no cracks, gaps or burrs around the holes.
2. Connect the water pipe. First, close the main tap water valve and connect the water purifier. The interface should be wrapped with tape to avoid water leakage.
3. Connect the concentrated water discharge port. The water purifier can directly put the sewage pipe into the sewage pipe, and the port should leave a certain space to prevent the sewage from flowing back to the water purifier of the health home and prevent the siphon phenomenon of the sewage outlet; If the blowdown pipe of the water purifier is directly put into the blowdown pipe, a ball valve should be installed at the end of the blowdown pipe, which can play a role in blowdown if it is opened from time to time; The sewage pipe can also be directly connected with the original tap water. The sewage pipe must be connected with the sewage outlet of the water purifier to avoid water leakage.
4. Connect the purified water outlet and the purified water faucet. If the flow rate is greater than 1000 liter, you can directly use 4 branches and general faucet; If the flow rate is less than 65,438+0,000 liters, you can choose to connect the 4-to-2 connector with the purified water outlet and connect it with the 2-point water faucet through the 2-point white PE pipe. When connecting the branch pipe 2, first flatten the nozzle, then install the nut, then insert the plug into the pe pipe and tighten it. Insert the PE tube about 1CM outside the nut and tighten it.
5. Install the faucet: If you want to install the faucet on the sink, the stainless steel sink can be opened with a hole opener. If you want to fix the faucet on the wall, you can use the right-angle faucet pendant to fix the faucet on the wall. The joint connection method is the same as (4), and the fixed part should be tightened without shaking.
6. Open the main inlet ball valve, debug the water purifier (see Maintenance for debugging steps), and observe whether the joint leaks. The observation period is at least 2 hours. You can put a clean dry towel under the water purifier and check whether there is water seepage.
The installation method of water purifier is professional, and it is usually installed by specialized technicians. The installation quality of the water purifier also has a certain influence on the later use. The above is the relevant content of the installation method of the water purifier.