What kind of nail paste is stronger? Manicure can make fingers slim and beautiful. Now, more and more girls have been pursuing perfection and love it. Many people also like to paste their nails at home, so what kind of nail paste is stronger?
What is a stronger nail patch? 1 How can nail polish be stronger?
1, first of all, it is necessary to carry out a transformation on the nail, cut off the nail to ensure that the nail can't be seen after being pasted, then polish it, subtract the cutin from the edge of the nail, and then you can choose the nail according to your own nail appearance.
2. Generally, the nail plates vary in size. Choose the nail plate that suits you according to the total width of your ten nails, and then polish the nail plate to a degree that is more closely combined with the specifications of your nails. After this step, you can gradually stick the nail board.
3. Scrape nails, and apply super glue on the reverse side of the nail plate. Pay attention to the usage of super glue, neither too much nor too little. Then, stick the nail plate on the edge of the nail, press it down at 45 degrees, dig out the gas inside, make it stronger, and be careful not to let the nail plate tilt.
Frequently asked questions: After the super glue dries, you can make patterns and polish your nails at will by trimming your nails to your favorite appearance. Until the nail polish is dry, beautiful nails will be done!
How does nail polish treat nails?
Suggest using your own nails. At first, it didn't hurt the human body that much. Nail plates are difficult to remove, which is very harmful to your nails. Besides, it is inconvenient and unsightly to stick it for too long.
I never nail myself, and nails can't embrace nature, so it's extremely inconvenient to disassemble and assemble. In the case of disassembly and assembly, my nails were seriously damaged, and even a very skilled manicurist could not guarantee that my nails would not be completely damaged. Many beautiful women say that my nails are damaged because I don't have enough nail expertise, and my nails are damaged when I put them on and take them off.
Now there is phototherapy extension and amethyst increase. All belong to powdery liquid state, which is simple and convenient, does not hurt nails, has no connection trace, is beautiful and generous, and is easy to use. Attention, please ask a manicurist with poor skills to do ultraviolet phototherapy. The increase of amethyst is more serious than sticking nails.
It's best to treat all nails as your own. Pay attention to maintaining the physical and mental health of nails. Choose a good manicurist and a manicurist with a health permit. Because the general smell of nail glue is harmful to human body, the products that have passed the environmental hygiene certification are at least guaranteed. It's best to choose a manicurist you are used to, and you don't have to change it often. And always be careful not to let them polish their nails. It is acceptable to go back and forth a few times with nails removed. If you feel a little uncomfortable, don't talk about anything, change stores immediately.
What is the nail patch stronger? 2 exfoliation
Apply softener to the edges of fingers to soften calluses, and remove calluses with calluses scissors;
Shape modification
Trim the nail shape as required;
Nail-trimming stick ruler
Stick a nail sticker and cut it according to your own preferences;
Increase viscosity
Adopt nail stickers with moderate specifications, put your hand in the nail sun lamp, let the super glue on it melt, and increase the adhesion of the nail stickers;
Apply sealing coating
Apply background nail polish, evenly coat the seal coat on the whole nail, nail the nail according to your favorite style and color, and you can stick it firmly.
What should be used to stick the nail board more firmly? 3 1. Cover the nail plate on the nail cover, press the front end of the nail plate with your thumb, compare whether the radian of the nail plate matches the rear edge of the nail, and choose a patch slightly wider than the width of the nail bed.
2. Grind the rear edge and both sides of the nail plate with an abrasive belt until it fits the curvature of the finger edge.
3. Continue polishing, and put the polished nail plate on the nail to match the size. Check whether it fits perfectly.
Step 4 polish the nail surface. Gently polish the entire nail surface vertically with the rough surface of the sand bar. Can't leave a smooth surface.
5. Clean the nail surface with a dust brush.
6. Apply the glue to the groove on the back of the nail plate, and rotate the patch left and right to make the glue evenly distributed. Note that the gluing area should be similar to the nail surface. Note that the back edge of the nail plate should be coated with glue, otherwise it will easily become warped.
7. Press the rear edge of the nail to make it match, gently stick the nail to the surface of the nail, adjust the skew, and press hard 10 second.
8. Gently press the nail plate on both sides with your thumb to make it have stronger adhesion with nails.
9. Cut off the excess part of the nail plate, press the attached nail plate with your thumb, and cut off the excess part of the nail plate with U-scissors.
10, use abrasive belt to polish rough surface. Note that the front end of the nail is polished horizontally into a straight line with sand strips, and both sides should be polished to the same level as the nail.
1 1. Continue to polish the nail surface, and gently polish the nail surface with a sponge file.
12, clean the nail surface, clean the nail surface with a cleaning brush.
13, coloring, nail surface primer, lighting. Then apply two thin layers of nail polish glue, pay attention to wrapping and polishing.
14, apply the seal coat, which is a thin seal coat on the nail surface, and turn on the light.
15. Wipe off the floating glue with 95 alcohol.
16. Apply nutritional oil, brush the nail edge with nutritional oil and massage until it is absorbed.