Ask network experts: how to set up a wireless router after the router connects to the switch?

Confirm your settings:

The lan ip of the subordinate route is set correctly.

The wan connection mode of the slave route should be changed to fixed ip, and the ip addresses are 192. 168.438+0.2 and 1.3 respectively.

The gateway and dns are both set to192.168.1.1.

Dhcp is enabled for all three routes, because the assigned ip is not a subnet, so there is no conflict.

The wireless encryption method should be wep2.

The line from the switch should be connected from the route to the wan port.

Hand, hope to adopt.