In the magnetic coagulation water treatment process:
1. Revolutionary increase in flocculation settling speed up to 20-60m/h.
2. Extremely strong removal of total phosphorus in wastewater.
With the process to achieve effluent TP<0.1mg/L, turbidity<1NTU, SS<5mg/L, COD, BOD removal rate of about 50%.
3. Speed up the coagulation reaction time, enhance the flocculation reaction effect. Reduce the amount of chemicals used by more than 1/3.
4. Municipal water supply using magnetic coagulation process to deal with conventional coagulation and precipitation process is difficult to remove organic pollutants and heavy metal ions. The process can reduce the generation of DBPs in the disinfection process, improve the quality of drinking water.
5.. Magnetic powder can be recycled and utilized, with a recovery rate of more than 99%, saving investment.
In the super-magnetic separation water treatment process as the core agent:
①Short processing time, fast speed, large capacity, the disk instantly generates a magnetic force greater than 640 times the gravity, high processing efficiency, short process, the total processing time of about 3 min, can be more than one parallel operation, to meet the requirements of the treatment of large flow rates;
② less footprint, stable water, occupies an area of about 1/5-1/10 of the traditional flocculation and sedimentation, coagulation time of 1 min, flocculation time of 2 min, the average flow rate of 320 m/h
③ high concentration of discharged sludge, disk direct magnetic adsorption of sludge, continuous salvage and lifting out of the water surface, and through the unloading system to get a high concentration of sludge;
④ the use of micro-magnetic flocculation technology, the amount of dosage of drugs is small, and the magnetic powder recycling rate is high, low operating costs;
4 the use of micro-magnetic flocculation technology, less drug, and magnetic powder circulation, low operating costs. Low operation cost;