Dismantling and cleaning method of overhead gun projector

Tianpao projector is a smart home device, which uses innovative projection technology to project the contents of TV, computer, mobile phone and other devices onto the wall or screen, so that users can enjoy a more comfortable viewing experience at home. However, the projector will inevitably produce some dust, dirt and other sundries during use, so it is necessary to clean it regularly. The following describes the disassembly and cleaning methods of overhead gun projector.

1. Preparation tools: screwdriver, gas tank, soft cloth or cotton swab.

2. Disassembly of the fuselage: First disconnect the power cord of the projector. After the fuselage is cooled, remove the screws on the fuselage with a screwdriver.

3. Clean the radiator: the radiator of the projector is easy to shelter evil people from evil. When cleaning, you can blow away the dirt with a gas tank, or wipe the dust with a soft cloth or cotton swab. Be careful not to damage the radiator when cleaning.

4. Clean the filter screen: The filter screen of the projector is also prone to dust accumulation, which will affect the projection effect if it is not cleaned for a long time. Gently remove the filter screen by hand, rinse with water or wipe with a soft cloth.

5. Installation of the fuselage: After cleaning, reinstall the screws on the fuselage to ensure that the screws are tight, neither too tight nor too loose.

In a word, cleaning the projector regularly can prolong the life of the equipment and improve the projection effect. Before disassembly and cleaning, it is necessary to disconnect the power supply and wait for cooling, and at the same time, the operation should be careful and gentle to avoid damaging the radiator and other components.