Model contract for the sale of machinery and equipment 1
Party A: ID number:
Party B: ID number:
As Party B owns an old set of equipment for the production of lime calcium, Party A needs to purchase the above equipment from the seller. Based on the principles of voluntariness, equality, mutual benefit, honesty and credibility, both parties have concluded the following terms and conditions of the contract through full friendly negotiation, so as to abide by them.
I. subject matter of the contract
the subject matter of this contract is the old equipment used in the production project of lime calcium. See the annex to the contract for the quantity, list and new content of the specific equipment list.
II. Contract Price
1. The total contract price is RMB 3, (say RMB three hundred thousand).
2. The total contract price includes the equipment and auxiliary equipment listed in the annex to the contract. Both parties confirm that the total contract price is the current price of the equipment listed in the annex, and both parties have confirmed the new rate and quantity of the equipment. The total contract price is only the price of the equipment itself, excluding the expenses of disassembly, packaging, transportation, installation and taxes.
3. this contract does not include the unit price, but only the total price.
iii. payment
the total contract price stipulated in article 2 of this contract shall be paid by the buyer to the seller through the bank according to the following methods and proportions.
1. One third of the total contract price, namely 1, yuan (in words: one hundred thousand yuan), together with 6, yuan (in words: sixty thousand yuan) of unpaid lime calcium powder from Party A and 16, yuan (in words: one hundred and sixty thousand yuan), shall be paid to Party B within three days after Party A receives the equipment list submitted by Party B and verifies it.
2. One third of the total contract price is 1, yuan (in words: 1, yuan), which shall be paid to Party B within three months after Party A's equipment installation and debugging are completed and qualified products are produced:
3. One third of the total contract price is 1, yuan (in words: 1, yuan) in _ _ _ _ _ _ _.
party b only provides the receipt of the equipment, and does not provide the invoice for the above money.
iv. overdue payment
if party a fails to make payment within the time limit stipulated in the contract, the four parties shall pay the liquidated damages arising therefrom, and the liquidated damages shall be calculated at 3% of the arrears every day until the payment is paid.
v. Delivery and acceptance of equipment
After Party A pays the first payment, both parties shall check the quantity and inspect the equipment at Party B's factory site according to the equipment list, and the delivery shall be deemed as completed after the check and inspection.
VI. Loading, unloading and transportation
Party A is responsible for the loading, unloading and transportation of equipment and bears the corresponding expenses, and Party B provides assistance in personnel and tools. The risk of damage or loss during loading, unloading and transportation shall be borne by Party A..
VII. Other agreements
After Party B delivers the equipment to Party A, Party A will employ Party B to install and debug the equipment until qualified products are produced. During the employment period, Party A shall provide food and accommodation, and pay the monthly salary according to the monthly salary standard. After the equipment is in normal condition, both parties shall negotiate separately whether to continue to employ.
VIII. Force Majeure
IX. Handling of disputes
Disputes arising during the performance of this contract shall be settled by both parties through consultation or mediation by relevant departments; If negotiation or mediation fails, a lawsuit shall be brought to the people's court according to law.
X. Supplements and Accessories
The list of equipment sold is an annex to this contract, which is an integral part of this contract and has the same legal effect as this contract.
Xi. effectiveness of the contract
this contract shall come into effect as of the date of signature by both parties. The original of this contract is in duplicate, each party holds one copy, which has the same legal effect.
Signing place:
Signature of Party A: Signature of Party B:
________ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
Model contract for the sale of machinery and equipment 2
Party A (seller)
Party B (buyer):
According to the Law of the People's Republic of China
2. Place of origin, manufacturer and production date:.
3. Quality standard:
According to the original quality standard, that is, the instruction manual shall prevail. The quality standards specified in the specification shall conform to the national standards, industry standards, general standards or specific standards for the purpose of the contract.
chapter ii contract price and payment method
article 2 contract price:
1. the total contract price of the equipment and equipment listed in this contract is RMB.
2. The contract price includes: the main equipment price (including 2m pipe fittings).
article 3 payment method:
first payment: 1% of the total contract price shall be paid within 2 working days after the signing of the contract.
chapter iii equipment acceptance
article 4 equipment acceptance procedures:
1. after the equipment enters the site, it works normally within 2 working days, and party b pays all the money.
2. If the equipment fails to work normally within 2 working days due to various reasons, Party B shall pay Party A a monthly rent of 23, yuan, and Party B shall be responsible for the equipment entrance fee and Party A shall be responsible for the equipment appearance fee.
chapter iv others
article 5 this contract shall come into effect as of the date when the authorized representatives of both parties sign and affix their official seals.
article 6 this contract is made in quadruplicate, two for party a and two for party B ..
party a (official seal): _ _ _ _ _ _ party b (official seal): _ _ _ _ _ _
legal representative (signature): _ _ _ _ _ _ _ legal representative (signature) : _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The organization organizes the annual agreement supplier procurement of office equipment (No.:GLZFCG2--A6), the tender documents, the bid-winning notice, the supply agreement and the No.1 agreement supply notice. The supply and demand sides have reached the following agreements on the supply of equipment related to the bid:
1. Name, trademark, model, manufacturer, quantity and amount of the goods
2. Delivery time: before _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Safe installation, normal operation after use, and quality assurance according to factory regulations and bidding commitments.
iv. place and method of delivery (pick-up): the supplier is responsible for delivering the goods directly to the place designated by the buyer free of charge.
v. mode of transportation, port of arrival and expenses: the supplier shall be responsible.
VI. Packaging standards, supply and recycling of packaging materials:
VII. Acceptance standards, methods and time limit for raising objections:
① All functions and technical parameters listed in the manual or product introduction provided by the supplier are available;
② The acceptance contents include: quantity, appearance, debugging performance, technical parameters, various explanatory materials, qualification certificates, etc.
VIII. Quantity and supply method of spare parts, accessories and tools: The supplier shall deliver all the spare parts, accessories, operating instructions and delivery list to the buyer.
IX. Settlement method and time limit: The supplier of the agreement shall provide the original materials such as purchase declaration form, agreement transaction notice (with purchase schedule), contract, acceptance certificate, invoice, etc., and submit them to the tendering company for verification, and then send them to the procurement office for payment-related procedures (within ten days after the end of each month).
X. after-sales service commitment: The supplier shall fully fulfill the service requirements specified in the bidding documents and all commitments in the bidding documents.
Xi. liability for breach of contract: if the type, model, specification and configuration quality of the equipment delivered by the supplier do not meet the standards stipulated in the contract, the buyer has the right to reject the goods. If the supplier fails to deliver the goods within the time limit, the supplier shall pay the buyer a penalty of one thousandth of the total purchase price every day.
XII. settlement of contract disputes: disputes arising from the performance of this contract shall be settled by the parties through consultation. if negotiation fails, either party may apply to the arbitration commission for arbitration until a lawsuit is brought to the people's court at the place where the contract is signed according to law.
XIII. Other agreed matters: meeting the requirements of the tender documents and bidding commitments.
XIV. this contract is made in quadruplicate: one for the supplier and the buyer, and two for the procurement management office of Guilin municipal government, all of which have the same legal effect.
party a (official seal): _ _ _ _ _ _ party b (official seal): _ _ _ _ _ _
legal representative (signature): _ _ _ _ _ _ _ legal representative (signature) : _ _ _ _ _ _ _ _
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ The two parties have reached the following purchase and sale agreement for (tools) equipment:
1. Party A orders the following equipment and tools from Party B (with a list attached, which is an effective part of this contract): Total amount: RMB amount in words: The above price includes: √ long-distance freight, √ short-distance freight, √ on-site handling fee, √ installation fee, √ tax and √ other fees:
2. Installation: <
2.2 party a shall prepare the foundation according to the requirements of party b, and be responsible for the installation of the power cord; Party B shall send personnel to assist in the development of the above work, and the equipment installation can only be carried out after ensuring the smooth development of the installation.
2.3 The warranty period of the equipment is years. In case of product quality problems, Party B shall be responsible for free maintenance and provide the required spare parts (except consumable parts), and other equipment or tools shall be implemented according to the standards specified by the manufacturer;
2.4 party a shall carry out daily operation, use and maintenance in strict accordance with the requirements of the instruction manual of the equipment, and the equipment damage caused by improper operation and use of party a's personnel is not covered by the warranty, but party b shall assist in solving it;
2.5 party a is obliged to arrange personnel to assist party b during equipment installation.
3. Delivery, acceptance and after-sales service:
3.1 The delivery date of the main equipment (including) in this contract is:
3.2 after the arrival of the goods, Party A shall check and accept the quantity, model and quality of the equipment according to the contract, and after confirming that it is correct, sign the sales slip of Party B or issue a receipt to Party B, and affix the official seal;
3.3 party a designates the equipment signatory of this contract as:, certificate number as:, and contact information as: The person in charge of equipment installation designated by Party B is:, ID number:, and contact information:;
3.4 the installation and commissioning time of party b is estimated to be working days;
3.5 after the installation and debugging of party b's equipment is completed, party a shall accept it within working days; If Party A fails to accept the goods within this period due to Party A's reasons, it shall be deemed that Party A has accepted the goods, and Party A shall not change the payment method.
3.6 party b shall deliver and install the equipment in strict accordance with the contract, delay the delivery by one day or deduct RMB from the total payment for installation by party a;
3.7 Party B's after-sales service is as follows: (quality, quality assurance, maintenance service, regular service, training, etc.)
4. Payment method:
After the contract is signed and sealed by both parties, both parties will pay in the following ways:
4.1 After the contract is signed, Party A will pay the down payment of RMB; (in words:)
4.2 After the major large-scale equipment (including:) in this contract arrives, Party A will pay RMB again, and Party B will issue the full invoice within days;
4.3 within months after the completion of equipment installation and debugging, Party A shall pay the balance RMB;
4.4 The collection account of Party B is:
Name: bank: account number:
5. Liability for breach of contract:
5.1 Party B shall supply goods according to the contract, be responsible for installation, debugging and training, and ensure that the equipment sold can be used normally to meet the needs of Party A.. Within five days after Party B's installation, commissioning, training and full invoice issuance, Party A shall pay as agreed in the contract. If Party A fails to pay or defaults on the payment, it shall pay Party B liquidated damages at the rate of ‰ of the total contract amount every day.
5.2 if party b fails to install, debug and train in time, or the installation, debugging and training can't meet the business needs of party a, and fails to provide maintenance services in the later period, party b shall compensate party a for the losses caused thereby, and pay liquidated damages to party a at the rate of ‰ of the total contract amount every day
6. party a and party b shall consciously abide by this contract, and bear corresponding legal responsibilities in case of default. If one party fails to perform the contract due to force majeure, it shall notify the other party in time and provide relevant evidence within days, and both parties shall discuss the modification of this contract separately.
7. in case of any dispute arising from the execution of this contract, both parties shall settle it through consultation based on the principle of facilitating cooperation; if negotiation fails, they shall file a lawsuit in the court where Party A is located.
8. this contract is made in quadruplicate, two for each party, and shall come into effect as of the date of signature and seal.
party a (official seal): _ _ _ _ _ _ party b (official seal): _ _ _ _ _ _
legal representative (signature): _ _ _ _ _ _ _ legal representative (signature) : _________
_________ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ Authorized agent: _ _ _ _ _ _ _
ID number: _ _ _ _ _ _
Mailing address: _ _ _ _ _ _ _
Postal code: _ _ _ _ _ _ _
Contact person: _ _ _ _. Box: _ _ _ _ _ _ _ _
Seller: _ _ _ _ _ _ _
Legal address: _ _ _ _ _ _ _
Legal representative: _ _ _ _ _ _ _
Position: _ _ _ _ _.