Submersible pump
Fish tank submersible pump Listen to this name should be a kind of water pump, but we also know that there are a variety of forms of pumps, such as three-in-one pumps, and inverter pumps, etc., then the air pump is used to fill the oxygen, so the fish tank submersible pumps are also used to stabilize the quality of the water at the bottom of the fish tank?
Fish tank submersible pumps are generally used as a filtration device for the exchange of water flow and set up in the fish tank, the role is to raise the fish tank water to the filtration tank, and then through the various areas of the filter tank, and then back to the fish tank, to play the role of circulation. Submersible pumps used as filtration, the flow rate needs to choose the total volume of the aquarium 3 to 5 times appropriate, such as the capacity of 100 liters of water in the aquarium, choose the flow rate of 300 liters / hour submersible pumps are better, the same, suction mouth need to be protected, set the volume of the mesh isolation mouth, to prevent suction injuries to the fish. So, how to use the fish tank submersible pump? Take Samson multifunctional submersible pumps, the user must first check the pump before using the pump on the nameplate marked rated voltage and the actual use of voltage is consistent. Pump power cord can not be replaced, such as in the use of the power cord is found to have damage, do not continue to use. Installation or removal and cleaning of the pump, you must first unplug the power supply, cut off the power supply to ensure safety. The use of filter baskets also need to be frequently cleaned to ensure that the normal ban on water and good filtration, because it is a submersible pump, so this pump must be submerged in the water to work, can not allow the pump to sleep outside the idling, so as not to damage the pump body. In addition, due to the friction sound of the shaft and pump body contact. Fish tank submersible pumps will also be used in the occasional noise, usually flat when the work of the pump's rotor by magnetic force, the bottom of the pump body against the shaft to prevent the rotor due to the reaction force of the water flow back, so it is inevitable that the core of the shaft and the pump body friction, the loud noise. Shaft grinding finished rotor is also useless, generally about a year.May also be the water flow and rotor friction sound. This is as long as it is still turbine centrifugal water pump, the theory is no way to avoid. But the design curvature of the runner, and surface finish will directly affect the size of the friction sound.
So, in the fish tank submersible pump selection, a small noise, or silent submersible pump will be the best choice for home breeding. In this regard, Samson multifunctional submersible pump is safe and ultra-quiet, and also meets the requirements.?