Canon printer cleaning program process
First: with the nozzle cartridge will be soaked in cleaning fluid at the nozzle external ink outlet, so that the cleaning fluid penetrates into the inkjet holes, additional to dissolve the crystals blocking the inkjet port.
First of all, the printer will be removed from the cartridge, you will find the bottom of the cartridge is similar to the part of the cumulative circuit, which is where the nozzle is located, will be poured into a clean and transparent cup of cleaning fluid, and then the bottom of the cartridge nozzles immersed in the cleaning fluid soaked in more than a few hours. Overnight is better. So that the cleaning solution works. It should be noted that, as long as the part of the nozzle immersed in water can be, can not let the cleaning fluid did not reach the nozzle electrical board and contact plate to prevent the water wet caused by a short circuit or damage, and do not put the entire cartridge into the water.
Soak a few hours after the cartridge will be removed, moderately hard to shake dry, the nozzle part of the ink will be thrown out some ink, with a napkin will be thrown out of the ink cartridge nozzles at the ink sucked dry, will be cleaned after the installation of the cartridges back to the ink cartridge cleaning process is complete, and finally use the printer to print a test page offline, compared to the effect of the cleaning. A little effect on the soak longer, if there is no effect on the direct replacement of the cartridge.
Second: without printhead cartridges
1: Fill cartridges loaded with cleaning solution to clean the cleaning solution loaded into the empty fill cartridges inside, and then take the cartridge ventilation holes plugs open, cartridges loaded with the printer, with the printer cleaning program to clean the printhead three or four times, and then in the printer static 24 hours. 24 hours after the printer cleaning program to clean. It is easier and safer to clean the printheads with a filled cartridge.
2: cleaning solution in a vessel on the printhead immersion cleaning.
①Take a clean vessel, pour a small amount of cleaning fluid into it
②Remove the problematic printheads, the printheads will be immersed in it, not let the cleaning fluid did not get to the printheads of the electrical board and the contact plate to prevent the water wetting caused by a short-circuit or damage
③The immersion time depending on the time of the printheads clogged just plugged up the head of the cleaning does not work to remove the printheads deal with the 1 -5 hours can be delayed for a longer period of time can be soaked for 12-24 hours!
How to do clogged nozzles teach you to clean the inkjet print head
If the inkjet printer print head in the work is completed did not return to the position of the protection, or a very long time do not use, will lead to clogged nozzles or even completely unable to print the situation. Inkjet printer print head clogging, cleaning is a somewhat complex process, we need to treat different products for different situations. This article is introduced with the printer driver comes with a soft tool-based.
First of all, Epson's products, because Epson's products, the use of micro-piezo technology, the printhead is cured inside the printer, cleaning can only be done through the program, if you want to dismantle the machine to clean, it is bound to lose the printer's original warranty, it does not pay to lose, and even if you use a special cleaner and ultrasonic generator, may not necessarily be able to wash clean.
There are a lot of cleaners on Taobao that claim to be clean and corrosion-free, but who has proven it? And the print head is a quite precise and delicate parts, in the dismantling and cleaning process, it is inevitable that collision will lead to damage, even if the collision is very slight.
If you still have a bad blockage after cleaning in the following way, the best solution is to contact your local Epson after-sales service department to see how much it would cost to replace the print head with a new one, so as to ensure the accuracy of the new print head installation.
In the control panel, find the printer, here to point to select, is the printing preferences, rather than the printer properties or properties.
Then, tap the Apply Tools tab, and perform a nozzle check on the upper left. The printer will print a sheet of paper with a tilted reticule, so it's easy to see if there are any broken lines or defects, and if there are, you'll need to perform a nozzle cleaning, which is the second button from the top left.
After performing a cleaning, it's time to print a nozzle check pattern to see if there are improvements and if all the lines are intact. It's important to note that this process is very ink-intensive, so make sure you have enough ink left over from the cleaning process.
What are some of the ways that Canon printers maintain common faults
The toner cartridge is an important part of the laser printer and is what determines the quality of the printer's prints. All machines have a life span, but the length of the life span varies, you maintain it well, your life span is longer than others. So we have to pay attention to the maintenance of the toner cartridge.
1. Don't take the toner cartridge consumables out of the package until you are ready to use it.
Generally speaking, the life of the toner cartridge supplies with the package opened is about half a year or less. To prevent damage to the toner cartridge supplies, be careful not to replace the toner cartridge supplies under bright light, and complete the installation as quickly as possible, with no more than a few minutes of exposure time. When it is time to remove the toner cartridge supplies from the printer, immediately return it to the box or wrap it in a thicker, soft summer cloth, and do not expose the toner cartridge supplies directly to sunlight or other strong light sources to avoid damaging the toner cartridge supplies.
2. Adjust the print density to save toner and extend the life of the toner cartridge supplies. Just replace the toner cartridge supplies of the laser printer, toner is more sufficient, so the printing concentration is larger, the text is clear, and at a later stage, with the reduction of toner cartridge supplies in the toner cartridge, the concentration of the printing is gradually reduced, the text or image becomes unrecognizable.
By adjusting the printer settings, we can keep the print consistency as stable as possible, saving toner. It also allows the clarity and color depth of the printed text to be maintained at a more uniform level, making it clear and pleasing to the eye. In addition, for informal files or print quality requirements are not high files, you can choose "economic mode" printing, so that the printer uses as little toner on each page, not only can extend the life of the toner cartridge supplies, but also reduce the cost of printing each page.
3. When toner levels are low, fading or lighter print colors can occur on printed pages. In this case, you do not have to replace the toner cartridge supplies and can temporarily improve print quality by redistributing the toner to complete the current print job. Remove the toner cartridge supplies from the inside of the printer and gently shake the cartridge supplies from both sides to redistribute the toner evenly. Be aware that the toner cartridge supplies should not be exposed to light for too long, and you can cover the photoconductive drum with paper to avoid direct light. If the print color is still light after the toner has been redistributed, you will need to replace it with a new toner cartridge supply or add new toner to the toner cartridge supply. In addition, do not touch the surface of the light-sensitive toner cartridge supplies with your hands to avoid scratching the cartridge supplies.
4. Regularly clean and maintain the toner cartridge by carefully removing the toner cartridge components and wiping the surface with degreasing cotton, but not too hard to prevent scratching the surface of the cartridge. Then, with degreasing cotton dipped in toner cartridge special cleaner to wipe the surface of the toner cartridge, wipe should be taken in a spiral circle method, immediately after polishing with degreasing cotton to wipe clean the cleaner. Finally, with a gauze containing talcum powder on the surface of the drum gently pat a layer of talcum powder, can be loaded back into use.
5. Usually in the replacement of toner should pay attention to the waste powder collection bin in the waste powder clean up, found in the output "leakage" immediately clean up the waste powder bin. Because the waste powder accumulation is too much, the first will appear "powder leakage" phenomenon, if you continue to use, because the waste powder contains paper dust, fibers and other dirt, more rough, and the cartridge friction for a long time, and more and more tight, the pressure is getting bigger and bigger, and ultimately will be the surface of the cartridge photographic film abraded, the cartridge will be damaged.
6. Don't overload the toner cartridge. There is a limit to the workload force of anything, and the toner cartridge is an organosilicon photoconductor, so there is also the problem of work fatigue. If you use it continuously for a long period of time, it will affect the print output effect, or declare ***, therefore, users should remember to give the toner cartridge a rest period appropriately. If you have been using it for years, it is best to leave it idle for a week or more before using it again.
But this must have an impact on the user's work, so it is recommended to buy more than two toner cartridges to alternate, so you can avoid toner fatigue at the same time will not affect the work. Good printer habits will also extend the life of the printer and toner cartridge. Such as only using laser printer recognized print media; keep the print media clean and tidy not curl folding, so as not to produce the phenomenon of stranded paper; do not let the paperclip, big head pin and other office supplies with the paper into the printer, so as not to scratch the printer heating film and photoconductor drum surface.