How to connect KAI for XBOX360 homebrew system

Hello! I am a senior student of Beijing Institute of Technology Zhuhai College, from the age of 6 years old contact with the first generation of mainland China's computer games began to last until now 23 years old, and still playing XBOX360, their dormitory has a, I have used XLINK and KAI. specific operation methods and precautions are very clear, if there is a lack of understanding of the place please search for tutorials yourself, only those with authority. My opinion does not represent the official opinion. But to give you a piece of advice, homemade system can not be on LIVE, now homemade system by Microsoft in the eye.

Equipment:

1, a homemade system XBOX360 host, a wired or wireless 3-port or more router (bandwidth within the range of 10-1000M, wireless router signal is strong) (if it is a new type of XBOX360 host, the host is placed in a wireless router signal within the range of the old version of the XBOX360 host must be used with the wired router). An ordinary dual-core computer (the system is in good condition and stable, the computer has an integrated or independent network card).

2, homemade system XBOX360 host supporting memory devices, handles, cables, power adapters.

Cables:

1, three long enough to use the ordinary network cable (not a direct line), the use of the later said. (Necessary relative to older XBOX360 consoles. (For newer XBOX360 consoles, two cables are sufficient).

Software:

1, WINXP, WIN7 X86/X64 system

2, KAI software

Internet environment:

Telecom or Unicom, Netcom's wired broadband (4M or more)

Old XBOX360 cable and the device's connection method:

1, XBOX360 host power adapter, video cable, handle and TV or display connected to normal, here omitted.

2, the first ordinary network cable (Telecom, Netcom, Unicom comes with the extension to one end of the MODEM) connected to the WAN port of the wired routing, the computer network card with the second ordinary network cable will be connected to one of the LAN port of the wired routing, followed by the old version of the XBOX360 host's own network card port with the third network cable to connect it to the second LAN port of the wired routing.

3, so that we will be the computer, XBOX360 host and external Internet network connected to each other, step by step can not be connected to the wrong port.

New XBOX360 cable and device connection method:

1, the first step with the old version of the XBOX360 step 1 connection is the same.

2, the first ordinary network cable, that is, the external Internet network extends to the home user MODEM one end of the connection to the WAN port of the wireless router, remember that the new XBOX360 host placed in the wireless router signal range. The second cable connects the computer's NIC port to the wired LAN port of the wireless router or use a wireless network receiver to connect to the signal of the wireless router.

3. The computer, XBOX360 console and external Internet network are connected to each other.

How to use:

1. Install KAI software and run it normally.

2, open the XBOX360 host, enter the screen with the joystick in the "My Xbox360" column group selection to "System Settings", enter the next menu, and then select a similar word " Network Configuration", enter and then select a similar word "detect the connection with the computer", can not be wrong, remember this key step. Then there are three patterns inside the dialog box flashing back and forth until all pass. Will pop up a dialog box "show my computer", if the name of your computer shows the number that you connect successfully, otherwise it may fail.

There are a lot of questions about what to do until the connection is successful, so please take your time to figure it out.

Can refer to other players' opinions. Thank you!