Matters needing attention in construction safety of computer room

1. According to the relevant regulations of the state, the construction personnel stationed in the computer room should hold the nationally recognized operation certificate (electrician operation certificate, welder certificate, etc.). ) and within the validity period;

2. The construction personnel stationed in the computer room should be in good health, and the country has no requirements for isolation observation and treatment of infectious diseases;

3. The personnel stationed in the computer room shall work in the designated area, and shall not enter other areas unrelated to the project, and shall not operate equipment unrelated to the project;

4. Construction personnel shall abide by the relevant provisions of the computer room. Please consciously sign in to the duty room of the computer room every day, and consciously accept the inspection when you leave with your belongings;

5. All construction personnel are not allowed to smoke, drink or eat in the computer room;

6. The instruments used in the construction shall pass the inspection and be used within the validity period;

7. If hot work is needed during the construction of the computer room, measures should be taken to prevent fire and splash. Please bring your own special fire extinguisher in the machine room, and other types of fire extinguishing equipment that are not allowed in the machine room are not allowed.

8. Please carry out safe and civilized construction, clean up the site after construction every day and take safety precautions;

9. During the construction process or after the completion of the project, the equipment, materials and devices shall be protected from pollution and damage.

10. Safety technology, labor protection, fire prevention measures and environmental protection during construction shall comply with relevant national laws and regulations and current relevant standards.

1 1. Other unfinished matters shall be settled through on-site negotiation.

Extension: Computer Room Security Management System

1, AC power cord, DC power cord and signal cord shall be laid separately.

2. The power cord and signal cord shall not pass through or penetrate into the air conditioning ventilation duct.

3, prohibit disorderly pull temporary cable.

4, should keep the computer room clean and tidy; Keep the equipment in order and the wiring neat.

5. The oil engine room and the oil storage room should be set separately, and the oil storage capacity should not be greater than that of the oil engine 8 hourly workers.

6. Instrument cabinets, spare parts cabinets, tool cabinets and filing cabinets shall be provided. All kinds of articles should be stored in a fixed location.

7. Do not pile up articles and sundries inside and outside doors, passages, intersections, before and after equipment and near windows, so as not to hinder traffic and work.

8, equipped with gas masks, fire extinguishers and other safety protection articles as required.

9. Positioning of all kinds of fire fighting equipment, and regular inspection of fire prevention facilities and equipment.

10, open flame is strictly prohibited in the computer room unless necessary.

1 1. If it is really necessary to use naked flame, it must be approved by the competent leader and corresponding preventive measures should be taken.

12, comprehensive personnel on duty should have comprehensive duty ability. Comprehensive personnel on duty and doormen must receive fire prevention training.