1) After the watch is plugged in, download an APP software;
2) Open the software, enter the login interface, click "Register" directly, and then enter the information according to the prompt to complete the registration.
2, set the family number
1) After completing the above registration, you can enter the account password to log in;
2) After logging in successfully, you can set multiple groups of home numbers in the device, and set the most commonly used number as the first one, and the device will call in turn when calling.
3. Set the call mode
1) Monotone and bidirectional call are optional. Single call means that the mobile phone can hear the sound of the watch, but the single watch can't hear the sound of the mobile phone. Two-way call can be understood as normal call mode;
2) Special note: I love Internet of Things watches, which are mandatory calls. Whether in one-way or two-way mode, the mobile phone calls the watch directly, and the watch cannot refuse, and no operation is needed. The watch will ring normally when making a phone call, and it will dial in turn according to the set home number. Once the call button is pressed for a long time, the watch will not hang up, and it will hang up after two cycles until the phone is answered.
4. Set the working mode
1) emergency mode: the equipment uploads positioning data every 10 second, which can keep abreast of the equipment dynamics, but it consumes a lot of power, greatly reducing the working time, and the standby time is about 8 hours. Please use this mode with caution;
2) Power saving mode: 10 minutes to upload a certain amount of data, and use this mode normally. Customers are advised to use this mode for 24-30 hours:
3) Sleep mode: upload positioning data every 1 hour. When the equipment is stationary for a long time, using this mode can save 30-50 hours of electricity; The above use time is the test time, and the specific time will be slightly different due to the signal strength of the equipment at that time.