With the popularity of wearable devices, more and more people wear smart bracelets. I will take the music bracelet mambo2 as an example to tell you how to charge the smart bracelet.
Tools/materials
Happy mambo bracelet
Mobile phone connected to bracelet
Lexin sports APP
0 1
The first step is to check the power of the bracelet and open the "Lexin Sports APP" with your mobile phone.
02
Click to enter my interface. There are connecting devices below, and you can see the power of our bracelet.
03
Take out our bracelet and find the place with USB logo on the back of the bracelet strap.
04
Press a small square on the back of the bracelet and remove one side of the bracelet to expose the USB interface.
05
Plug the USB interface directly into the USB interface of the computer or charger to start charging.
06
After charging, an animated display of charging will appear on the front of the bracelet.
Special tips
The charging time is about one hour.
Fully charged can turn on all functions battery life: about five days.
How to charge the bracelet?
1. First, after you get the bracelet, gently press the strap down with your left hand to expose one end of the fuselage, and then remove the fuselage from the bracelet. This step is mainly to remove the strap from the bracelet.
2. Identify the direction of the charging contact of the fuselage, which corresponds to the bracelet charger, that is, it is installed correctly.
3. After the charger is installed, we can use usb interface to charge, or we can install a special plug to charge. The indicator light of the bracelet lights up, indicating that the charging is successful.
4. After the ring is charged, gently pull the bracelet strap by hand, and put the bracelet body into the strap in the correct direction (installation is more laborious than disassembly, so pay attention to the uniform force and avoid the body falling off). At this point, the whole charging process is over.
How to charge the bracelet?
1. Find a special bracelet charger in the product box, and you can buy it if you lose it in official website.
2. Pull out the main display device inside the handle ring, which is not integrated with the hand strap and needs to be pulled out for charging.
3. Then plug another USB into the computer or mobile phone charger, and then the display on the surface of the bracelet will prompt that it is charging.
4. The power of the bracelet is also a percentage system. If you see that the bracelet charging animation does not move, it means that the bracelet is full.
How to charge the smart bracelet
Take Huawei bracelet 4 as an example:
First, charge
1. Press and hold the quick release button (long wrist strap end) to separate the wrist strap, and then insert the USB charging port into a charger with USB interface or a computer USB interface for charging.
2. Insert the charging metal sheet of the bracelet against the charger metal sheet in the middle of the USB interface, and the bracelet will vibrate to remind you when it is turned on.
3. When charging, a charging icon and power prompt will appear on the screen, and the main body will start automatically, otherwise, please change the direction of the charger and try again.
Warm reminder:
The bracelet will vibrate twice when it is turned on for the first time, and the screen will light up when it vibrates for the second time. The whole process takes more than 12 seconds. Please be patient.
Please keep the charging interface dry and clean before charging to prevent short circuit or other risks.
If the bracelet screen is stuck or black, open the bracelet and restart.
The bracelet is not equipped with a charger. Please use Huawei charger with rated output voltage of 5V and rated output current of 1A or above, computer USB interface, or a charger that meets applicable national regulations and international and regional safety standards to charge the bracelet.
Other chargers and mobile power sources (charging treasures) may not meet the applicable safety standards, resulting in problems such as slow charging and fever. Please use them carefully. It is recommended to purchase Huawei chargers from Huawei's official channels.
Second, the charging time
The bracelet is fully charged for about 90 minutes (ambient temperature is 25℃), and the battery icon shows full charge after it is fully charged.
Warm reminder: In order to ensure the safety of the battery, when the ambient temperature is too low, the charging current of the battery will be much smaller than that at room temperature, resulting in a longer charging time. It is recommended that you charge the bracelet at a temperature of > 20℃.
Third, check the power supply.
When the bracelet is open, click on the dial to check the power.
Click More Batteries to check the power.
Check the power of the bracelet in the sports health App bracelet details interface.
Warm reminder: the power is continuously displayed in 1%.