Jinan Health Action Guide

This machine is relatively simple to operate, depending on whether it is double-head independent control or one-drag two-type. Operating steps: 1. Install the program to be processed. 2. Precautions for the origin of the workpiece (the origin set during software programming): If it is independently controlled, it is necessary to combine the control switch to accommodate two gongs with plates. The distance between the heads requires two knives to contact the plane of XY and Z at the same time. 3。 Start the spindle to adjust the feed speed, slow down at the beginning, and the spindle speed is 4. Let's start dealing with it. Maintenance: 1. XYZ shafts should be lubricated frequently (oil is the best) and cleaned in time. Prevent the slider from bursting. 2. Check the spindle temperature and change the water in time. 3. Blow off the dust in the trailer box in time. If there is too much dust, it is easy to cause problems. Note: Operating the machine is relatively simple, the key is software programming, which requires some technical content.