The whole process of opening the back cover is complicated and meticulous, and every link should be careful to avoid unnecessary damage to the watch.
The specific method is as follows:
1. Push the back shell with your fingers, and the upper shell of the sleeve-pressing waterproof watch is sleeved on the bottom cover.
The back cover of this watch case has a special shape with a high wall around it.
3. The movement is installed in the enclosure wall of the back cover, and the watch glass is directly covered on the enclosure wall of the back cover. After the upper shell sleeve is pressed in, the front glass and the back cover are tightly covered, which plays a sealing and waterproof role.
4, spiral waterproof watch, its watch case upper shell and back cover have threads, relying on the role of threads to make the upper shell and back cover tightly screwed together.
The watch glass is pressed in with a tool, which is relatively tight. A waterproof gasket is placed at the place where the upper handle head and the rear cover are screwed together with the upper shell.
6. The knife edge of the watch opener is aligned with the opening of the watch back cover. As long as you master the strength, it is easy to open the back cover of the watch.
Screw it in first, open it and put the lid back.
The operation method is as follows: 1. The back cover of the watch case is threaded, and the upper case and the back cover can be tightened according to the function of the thread. The watch glass is pressed in tightly with tools.
2. The back cover can be opened with a universal watch opener, and can be replaced according to the four raised patterns of the back cover of various watches.
Huaqiang North s8 smart watch is a product of Shenzhen Yeshi Technology Co., Ltd. It is a very reliable watch, made of stainless steel, with health monitoring function.
How to open the back cover of the watch?
The way to open the back cover of the watch is to cover the buckle with your fingers and pry it open with your thumb nail. If it can't be pried open, you can use a thin blade and then loosen the back cover with a kneaded rubber ball. Details are as follows:
1, pry it open with your thumb nail first.
2. Find the gap in the back cover, clamp this place with your nails and start prying the back cover.
3. Clip the nail into the groove, and then lift it forcibly.
4, pry open the back cover with a blade, if the nail is too short, you can pry it open with a thin blade.
5. Find a rubber ball that can be kneaded at will.
6. Turn the rubber ball counterclockwise to make it turn faster and more stable, so that the rubber ball is firmly attached to the back cover.
7. Loosen the rear cover with a rubber ball.
Precautions:
1, pay attention to the strength when you skip, and don't break the watch.
Be careful not to damage the internal parts of the watch.
How to open the back cover of a telephone watch?
Question 1: How to open the back cover of mobile phone watch to make it waterproof? The back cover needs professional tools or methods to open.
Question 2: Why can't the back cover of the mobile phone watch be opened? Unscrew the back cover with the screwdriver included in the package of the 360 Child Guard Watch. Do not screw back to open the back cover.
Question 3: How to open the back cover of the watch? There are generally two kinds of back covers. You certainly don't have any tools to switch, and I don't know what your watch looks like.
Is it a cruciform screw or a round one? If it is a cruciform screw, it can also be punched with a needle-nosed pliers. Not really. If it is a Phillips screw, find a small Phillips screwdriver to open it.
Question 4: How to pry open the back cover of a watch There are generally three ways to connect the back cover and case of a watch.
1. threaded connection. The cover and case of this kind of watch are threaded, and the obvious sign is that there is a gap or polygonal circle on the edge of the cover. This kind of watch cover should be unscrewed with a special wrench.
2. Snap connection. The cover and case of this watch are buckled in a concave-convex structure. This kind of watch has a flange on the lid edge, and some have nothing. This watch cover can be pried open with a blade. When prying the meter cover, you can pry the meter cover with the fulcrum, as shown in the figure.
3. Threaded connection. The cover and case of this watch are connected by several screws, and the edge of the cover has holes. After the screw passes through, fix the cover on the shell. This watch cover is opened with a screwdriver.
Question 5: How to open the back cover of the watch? Explain that the watch shop has a special tool to open the back cover of the watch. . . But I opened it myself with a knife. . . You'd better not do it yourself, there will be traces. If the landlord confirms that the back cover of the watch is rotated, it is best to open it with special tools. Especially the new watch is very tight. It is suggested to open a watch repair shop, even a roadside shop, with special tools. If you want to try it yourself, it depends on the structure. 1, if there are 6-8 small grooves on the back cover, press it with a screwdriver and apply force counterclockwise. 2. When the edge of the back cover is octagonal, find a very new pliers, especially if the pliers mouth is not worn, resist the counterclockwise force. . How to open the back cover of the watch? The back cover of most watches is spiral. How to open the watch back cover can only be opened with the watch opener or the watch key (Figure 2 14). When using the watch opener, you can twist the back cover slightly in the tightening direction and then loosen it. If you find that the back cover is tight, you can drop lubricating oil around the back cover, and you can open the back cover of the watch after a while. How to open your thumbs when pressing the back cover of your watch? Watch shops have special tools to open the back cover of watches. . . But I opened it myself with a knife. . . You'd better not do it yourself, there will be traces. If the landlord confirms that the back cover of the watch is rotated, it is best to open it with special tools. Especially the new watch is very tight. It is suggested to open a watch repair shop, even a roadside shop, with special tools. If you want to try it yourself, it depends on the structure. 1, if there are 6-8 small grooves on the back cover, press it with a screwdriver and apply force counterclockwise. 2. When the edge of the back cover is octagonal, find a very new pliers, especially if the pliers mouth is not worn, resist the counterclockwise force. . How to open the back cover of the watch? The back cover of most watches is spiral. How to open the watch back cover can only be opened with the watch opener or the watch key (Figure 2 14). When using the watch opener, you can twist the back cover slightly in the tightening direction and then loosen it. If you find that the back cover is tight, you can drop lubricating oil around the back cover, and you can open the back cover of the watch after a while. How to open your thumbs when pressing the back cover of your watch?
Question 6: How to open the back cover of a smart watch? Generally, smart watches are waterproof, and the back cover needs professional tools or methods to open.
Question 7: How to open the back cover of Little Genius's phone watch? Hello, disassembling the machine without permission is not covered by the warranty. If you want to test and repair the machine, you can take the machine and warranty card to the local genius for free after-sales inspection.
Please go to Baidu to search, click to enter our little genius official website-service-service outlets-and then select the corresponding provinces and cities, and you can find the address, contact number and working hours of the local little genius product special service center.
Question 8: How to open the back cover of Little Genius's phone watch? Because it is waterproof, the back cover needs professional tools or methods to open it. In the process of disassembly, traces will be left, which will lead to the situation that the warranty cannot be guaranteed. Of course, you can remove it by force if you don't care, but you can remove it from the front cover.
Once the back cover is connected to the circuit board, excessive force will cause damage. It is not recommended to come from the back. I hope this answer is helpful to you.
Question 9: How to open the back cover of this watch? 100 most people don't have a special wrench to open the watch cover. If you really want to open it, you can try it with the tools at hand, such as calipers and high-strength scissors. The specific method is: open tools such as calipers or scissors until two opposite grooves on the edge of the watch cover are just caught, press the tools down gently and rotate them counterclockwise at the same time to open them.
Question 10: How to open the back cover of the watch? Twist it at the gap with a special tool.