How to repair the broken screen window?

Invisible screen window is the simplest and most effective way for many people to prevent mosquitoes from entering the room. However, when some screens are used for a long time, there will not only be a lot of dust, but also some small edges and corners. At this time, we can actually replace the screen window ourselves, but it is relatively complicated to do it ourselves, and we can also find other masters to install it. In fact, replacing the screen window is very simple. If the screen is too dirty or has holes, it is recommended to replace it directly. Compared with cleaning or repairing holes, it saves much time and effort, and the tools used are quite simple. However, there are still many people who can't change screens. Today, the master will teach you how to change the screen window skillfully.

burrow

First remove the screen window, pry up the wooden strips of the old screen window with a screwdriver, and then pull up the whole wooden strips of the old screen window to replace the screen window. Usually, the window screen will be replaced with the batten, and then the size of the window frame will be determined and the excess pvc will be cut off. After determining the size, insert the pvc strip into the triangle to make a frame. Align the two sides of the new gauze with the inner edge of the window frame, and reserve enough parts for pressing and fixing. Lay the gauze flat on the finished frame, and press the gauze into pvc strips with slotted magnetic strips. It is suggested to tilt the slotted magnetic strip, push the gauze into the inside of pvc strip, and then press the outside. The adhesive-backed magnetic strip is adsorbed on the card slot magnetic strip, and a second clip is installed at a position about 30% from the top of the frame. The protective film of the adhesive-backed magnetic strip is pulled out at the position where the clip is installed and installed in the clip. Window frames must be clean and kept dry. First, tear off the protective film of the upper adhesive magnet. After fixing the position, gradually tear off the adhesive protective film on the left, right and lower ends and the clip, and press the adhesive magnetic strip hard. Press the whole layering in with a special rope press car for screen window. It is more convenient to press the angle and fix it with a screwdriver.

Fixed; unchangeable

When fixing the third and fourth edges, the gauze should be tightened, the layering should be pressed in, and finally the redundant layering should be cut off. Press down one end with a screwdriver and fix it, cut off the excess gauze along the edge of the window frame with a utility knife, and install strings on the lower two triangles to open and close the screen window, so that the invisible screen window can be installed, and it is very convenient to take it off directly when not in use.

screen

Screen window is the most environmentally friendly, effective, economical and healthful of all mosquito prevention methods. Screen windows can prevent mosquitoes from contracting dengue fever and Japanese encephalitis. But also can prevent outdoor dust and germs from entering the home. It is not difficult to replace the screen window and the screen window of the screen door by yourself. You can change the right tools yourself, which is convenient and saves money! Compared with buying a new screen window, it can save about 1/2 ~ 1/5. Is this a good deal?