Can the left and right bending of shelf pipe of roller steel pipe straightener be adjusted? It seems that the structure of the drum is forced up and down.

The principle of left and right bending adjustment of steel pipe straightener is that the circular groove on the pinch roller actually has the function of physical inclined plane. Seen from the front of the press wheel (not 152 looking through the 268th side of the press wheel shaft), when the left and right 00 adjustment screws of the press wheel press the 860th screw on which side and the arc on which side moves down, the shelf pipe is pushed to the other side by the action of the inclined plane. Therefore, according to this principle, when the shelf pipe comes out,

The left 2, left 5, left 6 and left 7 are tested clockwise, so don't move because the No.3 and No.4 screw tubes are adjusted up and down, and because the No.3 and No.4 screw tubes are in the middle of the machine, we press down the left 1 2, No.5, No.6 and No.7, so as to make these rollers at both ends of the machine move down in an arc, and push the shelf tubes to the right by using the principle of inclined plane (the first picture)

Hand-drawn), so the effect of squeezing both ends to the right without moving in the middle (No.3 and No.4) just corrected the problem that shelf tube bent to the left when he came out. If the shelf tube is bent to the right, adjust the five screws on the right clockwise in the opposite way (No.12567 on the right in the second picture).