In real life, large and small safety accidents are common, and even in our enterprises, all kinds of safety accidents often occur, especially in the front-line job sites, which are the high-incidence places of accidents. Below I have compiled the work plan for safety production in 2023 for everyone, I hope you like it!
Work Plan for Work Safety in 2023 (1) I. Inspection Purpose
In view of the frequent occurrence of rain, fog, snow and ice in winter, and the neglect of safety production at the end of the year and the beginning of the year, in order to prevent major safety accidents at the end of the year and ensure safe and orderly production, our unit specially carried out this winter safety inspection.
Second, the inspectors
The project department of our unit has set up a safety inspection team with the following personnel:
Team leader:
Deputy team leader:
Team members:
Third, check the key points
1, security system
Hazard analysis and emergency rescue plan, winter construction safety measures, technical disclosure of construction safety, publicity, education and training of winter construction safety production knowledge.
2. There is no "three violations" on the construction site.
Whether there are dangerous projects such as large-scale hoisting, whether there are "three violations" and the specific manifestations of "three violations".
3, fire prevention and riot prevention measures
Whether the management of all kinds of inflammable and explosive articles and the configuration of fire fighting equipment are reasonable and effective.
4. Traffic control measures in the construction area
Traffic signs shall be set up and necessary traffic control measures shall be taken on the road sections constructed on the edge of open roads; Warning signs should be set at the entrances and exits of construction areas that restrict social vehicles from entering and leaving.
5, field workers wear safety protection articles.
How many field workers are there in the inspected bid section, and how many people wear safety protection articles as required.
6, wellhead, high altitude limb safety protection.
Protection measures for pile foundation, reserved holes, ladders and bridge sides, and anti-falling and anti-hanging conditions.
7, the construction of electricity safety
Temporary electricity erection, whether it is in accordance with the specifications, whether the distribution box meets the requirements, and whether there are daily inspection records.
8, the construction site safety warning
Whether there are safety warning signs on site and whether they are comprehensive.
9, homework personnel living quarters management
Whether the heating facilities in the workers' dormitory are managed by special personnel, whether there is any phenomenon of naked fire heating and disorderly pulling and connecting electrical appliances, and whether the dormitory lines are erected according to the specifications.
Four, hidden dangers and corrective measures
After receiving the notice from the superior, our unit set up a safety inspection team to carry out safety inspection on the construction site, and now we find the potential safety hazards and corrective measures are as follows. Hidden safety hazards identified:
1. The fire extinguishers in the warehouse are all in the corner, so it is impossible to put out the fire in time and effectively in case of fire.
2. The fire extinguisher next to a distribution box on the west side of the absorption tower failed to inflate in time.
3. Some workers didn't wear seat belts when working at high altitude.
4. An acetylene bottle instrument failed at the scene and was not replaced in time.
5. The guardrail at the entrance of oxidation furnace on the 8m platform of device C was damaged, and it was not repaired in time.
6, the scene (template piled up neatly, not clear in time.
7. Workers' dormitories illegally use high-power electrical appliances for heating and open fire for heating.
The rectification measures are as follows:
1. The fire extinguisher in the warehouse has been placed in a conspicuous place at the door of the warehouse, and can be put into use immediately in case of fire.
2. The failed fire extinguisher beside the distribution box on the west side of the absorption tower has been replaced.
3. Carry out safety education for workers who do not wear safety belts for high-altitude operations, and the management personnel shall strengthen supervision.
4. The damaged acetylene performance has been replaced.
5. The fence at the entrance of oxidation furnace on 8m platform of device C has been repaired.
6. Template (wood square) neatly stacked.
7. Conduct safety education and fine treatment for workers who illegally use high-power electrical appliances and open flames to heat in the dormitory. Managers will strengthen supervision and management in this respect in the future.
The meaning of verb (verb abbreviation) test
1, through the construction safety inspection, understand the situation of safe production, and provide information basis for analysis and research to strengthen safety management;
2. Find problems, expose hidden dangers and take effective measures in time to ensure safety in production;
3. Summarize and exchange the successful experience of safe production, and promote the improvement of safe production level in this region and even in the industry;
4. Use the inspection to further publicize, implement and implement the safety production policies, various safety inspections and your rules and regulations;
5, enhance the safety awareness of leaders and the masses, stop illegal command, old card illegal operation, improve the consciousness and sense of responsibility of production safety.
Work plan for safety in production in 2023 (Part II) According to the company's management measures for safety in production, combined with the safety inspection system of the project department, the specific implementation plan is formulated as follows:
First, the overall goal
Further intensify the investigation of potential safety hazards in the project department, minimize accidents, eliminate all kinds of potential accidents, strengthen safety responsibilities at all levels and employees' safety awareness, create a good safety production environment, and ensure that the project department successfully completes the annual occupational health and safety objectives.
Second, the scope of inspection
The scope of safety inspection is the mine construction site and staff living quarters.
Third, regular safety inspection.
1. The regular major inspection of the project department is led by the first person responsible for production safety, and the heads of various departments and the monitor attend. The inspection should be focused and practical, at least once a month.
2. Regular inspection of departments and teams shall be organized by part-time safety officers of departments and teams, and mutual inspection of production safety shall be conducted at least once a week.
3. The Project Department shall organize a safety inspection every quarter.
ⅰ. Spring safety inspection focuses on lightning protection, anti-static, anti-electric shock and building collapse.
Ⅱ. Summer safety inspection focuses on heatstroke prevention and information prevention.
Ⅲ. Autumn safety inspection focuses on fire prevention, safety protection equipment and anti-freezing and heat preservation.
Ⅳ. Winter safety inspection focuses on fire prevention, explosion prevention, gas protection, snow prevention and anti-skid.
4. On holidays, a pre-holiday inspection should be conducted, and relevant departments and teams should be jointly organized to participate, including four inspections before New Year's Day, Spring Festival, Labor Day and National Day, mainly to check holiday safety measures, such as holiday duty, security, fire safety and holiday production preparation.
Fourth, the daily safety inspection
1, post operators should check the safety situation within the work scope of this post at any time in accordance with the safety operation procedures before and during work.
2. The team leader should conduct a comprehensive inspection of the safety production situation within the scope of the class before the operation, and check the safety situation again after the operation of the class, and hand over the hidden dangers of safety production and the handling situation to the next class during the handover. At the time of handover, related safety issues must also be carefully handed over. After the succession, check carefully, solve the problems in time when found, report the problems that cannot be solved to the subordinate departments, and record the situation in the shift-over diary at the same time.
3. The full-time (part-time) security officer on duty of the project department shall conduct safety production inspection.
4, security technology department should often go deep into the scene, safety inspection, listen to the opinions of the masses, found unsafe problems, timely urge the relevant departments to solve.
Verb (abbreviation of verb) specific requirements
1, attach great importance to and strengthen leadership. All departments should fully understand the great significance of safety inspection, regard it as an important task of current safety production, strengthen leadership and earnestly do a good job. It is necessary to implement the responsibility system for production safety at all levels and organize inspections.
2, production safety inspection should be checked, changed and implemented. Issue the "Notice of On-site Inspection and Rectification" in time for the problems found, and determine the personnel, measures and time. And take follow-up actions to ensure implementation. For problems that cannot be solved temporarily due to conditions, temporary measures should be taken to prevent accidents, and solutions and schemes should be put forward, and plans should be made to solve them within a time limit.
Every safety inspection organized by the project department must be truthfully recorded in the "Safety Inspection Record".
Work Plan for Work Safety in 2023 (Chapter III) In order to further establish and improve the responsibility system for work safety, earnestly strengthen the leadership of work safety, fully implement the responsibility system for work safety, improve the supervision and management of work safety, prevent the occurrence of work safety accidents, and create a good work safety environment for the company, this implementation plan is formulated in combination with the actual situation of the company.
I. Guiding ideology
Adhere to the policy of "safety first, prevention first and comprehensive management", fully understand the importance of doing a good job in production safety, further enhance the sense of responsibility, mission and urgency, and comprehensively consolidate and deepen the "four systems" of production safety (supervision system, operation management and safety management).
Second, organize and lead.
Group length:
Deputy team leader:
Members: heads of departments and offices.
The group has an office to collect, summarize and report the daily work and situation of safety production. The office is located in the security department.
Third, the main responsibilities
1, the main person in charge is the first person in charge of safety production, who is fully responsible for the safety production of this unit, integrates safety production into the overall planning of water supply development, conducts special research and deployment on safety production, clarifies the division of work under the leadership of the Group, implements the responsibility system for safety production, and ensures the necessary safety production investment.
2. The person in charge of production safety is the specific person in charge of production safety within the scope of responsibilities of the unit, responsible for the overall supervision and leadership of production safety within the scope of responsibilities of the unit, holding regular meetings on production safety, leading a team to carry out safety inspections at least/kloc-0 times a month, coordinating and solving work related to production safety, organizing production safety assessment, deploying and formulating emergency rescue plans for production safety, and organizing drills, and reporting major problems to the main person in charge to ensure that production safety is caught and managed.
3. Other responsible persons bear direct leadership responsibility for production safety within their respective business scope, regard production safety as an important content within their business scope according to the principle of "whoever is in charge is responsible", and urge the in-charge offices to formulate and implement the responsibility system for production safety. Supervise and urge the departments in charge to carry out supervision and inspection of production safety and investigation and rectification of potential safety hazards, and support and cooperate with the persons in charge of production safety.
Fourth, the work content
1, fully implement the contents of the responsibility book for safety production objectives and tasks;
2. Do a good job in the management of urban water supply, strengthen the maintenance of water supply facilities and equipment, strengthen the detection of water sources and water quality, and ensure the water quality of water supply reaches the standard and the safety of citizens;
3, new roads, residential areas, etc. In the process of installing water supply pipelines, urge contractors to improve water supply facilities, establish an early warning mechanism for safety production, ensure normal and stable water supply, and strengthen emergency and counter-terrorism work capabilities, accident reporting and investigation and handling;
4. All departments and offices should establish and improve the responsibility system for production safety of leading members, deepen the system of "one post and two responsibilities" for production safety, and implement the supervision responsibility for production safety. The person in charge of each department and office shall, in accordance with the principle of "who is in charge, who takes the lead, who takes the lead, who coordinates, who checks, who checks and who is responsible", assume the safety responsibility of their respective supervision work and earnestly perform the duties of the first person responsible for production safety; In charge of the person in charge should, in accordance with the requirements of "one post and two responsibilities", earnestly assume the leadership responsibility for safety production within the scope of business, and do a good job in safety production while grasping the business.
Verb (abbreviation of verb) specific requirements
Strengthen leadership and implement responsibilities. Safety in production is the focus of work. The main person in charge should seriously organize the work of production safety. The top leader is the first person responsible for production safety. All members of the team are responsible for the work safety in their assigned fields. All departments and offices should establish or improve corresponding safety organizations, formulate specific measures, and implement "one post and two responsibilities". Safety work should be carried out in every team and post, and problems and hidden dangers should be rectified immediately. If it is difficult to rectify for a while, it should be rectified.
Six, strictly implement the responsibility system for production safety.
In any of the following circumstances, the relevant responsible personnel and relevant leaders shall be held accountable:
1, safety accidents and incidents that seriously affect social stability due to ineffective implementation of superior policies or mistakes in decision-making;
2, due to the safety work organization, personnel, funds and target management responsibility system is not implemented, resulting in the department's safety work confusion, the annual safety production target management work assessment is unqualified;
3, due to the neglect of production safety work, resulting in production safety accidents, production safety accidents concealed, lied, delayed reporting, or failed to organize accident rescue work in time, resulting in casualties and property losses;
4. Other circumstances that require accountability as stipulated by laws and regulations.
Work Plan for Safety in Production in 2023 (Chapter IV) X Industrial Park is a relatively concentrated area of enterprises in our town, and it is the focus of safety supervision in the town. In order to strengthen the supervision of safety production in X Industrial Park, lay a solid foundation for safety production and promote the stable improvement of safety production situation in our town. According to the spirit of the Notice of the District Safety Committee on Printing and Distributing the Implementation Plan for the Special Renovation of Production Safety in Luyang Industrial Park, combined with the actual situation of our town, we decided to carry out the special rectification activities for production safety in X Industrial Park through research, and now we make the plan as follows:
I. Guiding ideology
Adhere to the requirements of safe development and scientific development, carry out the policy of "safety first, prevention first and comprehensive treatment" on the basis of the Law on Safe Production and the Regulations on Safe Production in X Province, further standardize the safety supervision institutions, teams, systems and accounts of industrial parks, establish and improve the responsibility system for safe production and the long-term mechanism for safe production, thoroughly rectify safety hazards such as construction, production enterprises, fire fighting and occupational health, and control key industries and accounts.
Second, the work objectives
Through the special rectification of production safety, the following objectives are achieved:
(a) the safety production system is perfect, the basic ledger is complete, and the responsibilities are implemented. Safety supervision institutions and teams have played a good role, and their safety supervision capabilities have been significantly enhanced.
(two) hidden dangers, weak links and obvious problems in construction, industry and trade enterprises, fire protection and occupational health have been effectively solved.
(three) effectively curb the occurrence of safety accidents, and the situation of safe production has improved significantly.
Third, organization
In order to strengthen the organization and leadership of this work, our town has set up a leading group for the special rectification of production safety in X industrial park, with mayor X as the team leader, vice mayor X as the deputy team leader, and relevant units and departments such as safety supervision office, construction office, city appearance office, X police station and X industrial park management committee as members to be responsible for the unified leadership of this special rectification of production safety. The office of the leading group is located in the town safety supervision office, and Tong Feng, the director of the town safety supervision office, is also the director of the office, responsible for organizing and coordinating, guiding and urging, inspection and acceptance, and other specific work.
Fourth, the main points of rectification
(1) Safety supervision infrastructure. According to the "Safety Production Law" and "Regulations on Safety Production in X Province", further standardize the operation of safety production coordination agencies and regulatory agencies in industrial parks and improve the regulatory network; Establish a target assessment and index control system in the park to strengthen the implementation of responsibilities; Improve the basic system of safety production, establish and improve the safety production management ledger, and comprehensively improve the safety supervision level of industrial parks.
(2) Road traffic safety. Investigate and control dangerous sections of industrial parks, reasonably set up and increase speed bumps, signal lights, warning signs and safety signs, take effective measures, and focus on preventing illegal acts such as large trucks and mixers occupying roads in logistics enterprises and concrete ready-mixed enterprises, standardize road traffic order and consolidate the foundation of road traffic safety. Implement socialized road traffic safety management measures, increase road management and accident investigation, and reduce traffic accidents.
(C) "Three cars" traffic safety. In accordance with the relevant arrangements for the rectification of "three vehicles" in the city and district, the main responsibilities of all parties shall be strictly implemented, a law enforcement mechanism of coordination and linkage shall be established, road management and control shall be strengthened, and traffic violations of "three vehicles" shall be strictly investigated. For the concrete ready-mixed enterprises in the park, it is required that winning numbers Lianghao transport, pay the safety insurance premium and install the GPS system, hire the "three vehicles" supervisor to continue to strengthen the stationing, carefully register the vehicles entering and leaving, and earnestly strengthen the traffic safety improvement of the "three vehicles".
(4) Construction safety. Carry out special rectification actions for construction safety, and strengthen safety protection measures for dangerous projects such as hoisting machinery, tall modules, deep foundation pits and scaffolding. Promote the establishment of construction project quality and safety standardization demonstration sites, clarify the responsibilities of all parties, strengthen supervision, implement safety funds, and realize that all projects under construction meet the requirements of safety site standardization.
(5) Fire safety. Establish and implement the fire safety responsibility system and fire safety system, and define the unit fire safety administrator; Strengthen the rectification of existing fire safety hazards, strengthen the construction of infrastructure such as fire hydrants and fire fighting equipment, and keep the safety exits and evacuation passages of buildings unblocked; New construction, renovation and expansion projects can only be constructed and put into use after they have passed the fire protection design review and fire protection acceptance according to law; Logistics warehousing and labor-intensive enterprises should establish voluntary fire fighting organizations, equip them with necessary equipment, strengthen fire safety education and training for employees, formulate unit fire fighting and emergency evacuation plans and strengthen drills to ensure that self-help can be carried out in time in case of fire.
(6) Safety of industrial enterprises. Strengthen source supervision, strictly implement the safety licensing system for high-risk industries and the "three simultaneities" regulations, and prevent enterprises with high risks, backward production technology or even illegal production from entering the park. Promote the standardization of safety and quality in high-risk industries, encourage enterprises to carry out the construction activities of occupational health and safety management system certification and post compliance, occupational compliance and enterprise compliance, and gradually improve the scientific and normative safety management. Implement enterprise ABC classified management system and "1+3" safety monitoring system, and actively establish a long-term management mechanism for safety production.
(7) Occupational health and safety. Implement enterprise occupational hazard declaration, urge enterprises to carry out occupational hazard evaluation, detection and occupational health examination, implement occupational health related systems, and take corresponding protective measures. Carry out special actions to control dust and toxic substances in the workplace, comprehensively control the weak links in the prevention and control of occupational hazards, solve existing problems, improve the workplace environment and improve the prevention and control ability of occupational hazards.
(8) Safety of special equipment. Strengthen the use registration and daily maintenance of special equipment; Enterprises that use lifting equipment, pressure pipes, container boilers, forklifts and traveling cranes are strictly required to repair, maintain and file equipment, and conduct inspection and testing on time and in accordance with regulations. Check (calibrate) safety accessories and safety protection devices as required; Operators should hold valid certificates for work; Improve the emergency plan and carry out emergency drills.
Verb (abbreviation for verb) working hours
From June 1 to September 20th, X.
Work requirements of intransitive verbs
(1) Attach great importance to and strengthen leadership. To carry out the special rectification work of safety production in industrial parks is an important measure to lay a solid foundation for safety production, establish a long-term mechanism for safety production and realize safe development. All units and departments should attach great importance to it, carefully formulate plans, and effectively take the special rectification of industrial park safety production as an important task of safety production this year. It is necessary to increase investment and arrange special funds according to the actual needs of special rectification work to ensure that all measures, standards and requirements are implemented.
(two) combined with the actual, in-depth study. Based on the principle of adjusting measures to local conditions, the construction of safety supervision institutions, systems and accounting in the park should have quantitative indicators, and the rectification of key industries should have targeted measures to truly achieve high level, practicality and simplicity. According to the work progress, timely study new situations and new problems, formulate corresponding measures, and adjust and implement them. In the stage of inspection and acceptance, we should fully grasp the characteristics of the work, sum up experience and practices in time, and promote the work from point to area.
(three) a serious summary, strict assessment. All units and departments should fully grasp the characteristics of the work, sum up experiences and practices in time, promote the work from point to area, and submit the summary of the work to the office of the town special rectification leading group before September 20 (telephone (fax): starting from September 2 1, and the town government will organize relevant units (departments) to evaluate the rectification work, and at the same time, check and accept half the enterprises in the park, and the evaluation and acceptance results will be included in the annual safety production target assessment. If the rectification task cannot be completed according to the specified time and standard requirements, the "one-vote veto" of safety production work will be implemented, and the qualification of pingxian Pingyou will be cancelled.
Work Plan for Work Safety in 2023 (Chapter V) In order to comprehensively rectify the potential safety hazards in the commercial market, resolutely prevent and contain deaths and influential safety accidents, and ensure the safety of people's lives and property, Xicheng Street Safety Committee decided to carry out special rectification of work safety in the commercial market within its jurisdiction from now until September 20, 2020, and formulated the implementation plan as follows:
I. Objectives and tasks
Conscientiously implement the spirit of the important instructions on production safety, adhere to territorial management, treat both the symptoms and the root causes, and resolutely eliminate hidden dangers in the commercial market in the jurisdiction according to the requirements of clear responsibilities, accurate base investigation, thorough rectification of hidden dangers, excellent law enforcement means, proper publicity and education, and strict accountability.
Second, the scope of remediation
Agricultural and sideline products market, daily industrial products market and comprehensive market within the jurisdiction.
Third, the main points of rectification
(1) All communities, local departments, and relevant units of the members of the Safety Committee should immediately conduct an inventory of the commercial market within their respective jurisdictions to ensure that no one is missing, and focus on controlling the chaotic safety of the commercial market, unauthorized construction, occupation of fire-proof space, occupation and blockage of "life passage", locking of safety exits, illegal sharing of places, defective fire-fighting facilities, illegal storage of inflammable and explosive dangerous goods, illegal use of fire and electricity, illegal parking of electric vehicles for charging, and fire fighting.
(2) Keep a close eye on the difficulties and implement the "seven unification" measures. In the process of investigation and rectification, all communities, local departments, and members of the Safety Committee should truly achieve "full coverage and zero tolerance" in the investigation of hidden dangers, and achieve "seven unifications" in the fire hazards and illegal acts found, that is, accommodation, production, storage and business premises that do not meet the technical requirements of fire safety shall be moved out, and those who refuse to move out shall be ordered to stop production and business; Evacuation passages and exits that do not meet the requirements of fire control must be rectified immediately. If it cannot be rectified immediately, it shall be temporarily sealed up according to law and ordered to suspend production or business; If the installation and use of electrical products and gas appliances, as well as the design, laying and maintenance of lines and pipelines, do not meet the technical standards for fire control and management regulations, they must be rectified within a time limit, and if they fail to make corrections within the time limit, they shall be stopped according to law and fined; Anyone who illegally parks electric bicycles and charges them in the buildings and halls must be rectified immediately, and those who cannot be rectified immediately shall be cleaned up according to law; If the doors and windows of crowded places are equipped with obstacles that affect escape and fire fighting and rescue, they shall be ordered to be removed immediately; The damaged, unauthorized closure and abnormal operation of building fire protection facilities shall be severely punished according to law; All major fire hazards that affect public safety will be submitted to the government for supervision.
Fourth, key industries.
Each community will bring the fire safety of the commercial market into grid management, establish a responsibility guarantee system, and conduct a comprehensive investigation and rectification of business units in the market.
The police station is responsible for the investigation and management of "nine small places" and rental houses within its jurisdiction, strengthening the management of floating population, increasing the inspection of illegal personnel, and urging rectification. Fire violations found in the inspection need to be transferred to fire rescue agencies for investigation, and shall be handed over in writing within five working days from the date of inspection; The major fire hazards found in the inspection shall be ordered to rectify and at the same time, the fire rescue agency shall be notified.
The community construction office shall carry out the fire design audit and fire acceptance of special construction projects according to law, as well as the fire acceptance filing and spot check of other construction projects. Strengthen the quality and safety supervision during the construction of business premises. , to ensure that the construction meets the fire protection requirements determined in the design drawings.
Xicheng Market Supervision Office should severely crack down on quality violations such as producing and selling fake and inferior wires, sockets and switches.
The comprehensive law enforcement office should strengthen supervision and inspection, and deal with shops along the street in violation of the Regulations on the Administration of City Appearance and Environmental Sanitation in conjunction with relevant departments. Carry out the issuance of the "life channel" notice of the anti-theft network. Supervise gas companies to do a good job in gas safety inspection.
After the establishment, we conducted a comprehensive investigation of business households in the commercial market, carefully found out the operating base, types and fire safety status in the market, guided communities and markets to carry out fire prevention publicity work, distributed fire safety instructions and "Understanding Paper" at the door, and urged the owners of "common places" to carry out independent assessment, independent inspection and independent rectification of hidden dangers, and regularly carried out escape and self-help drills.
The Property Management Office guides the property companies in the commercial market to carry out thorough investigation, guides the properties in the market to carry out fire prevention publicity and training, and regularly carries out escape and self-help drills. Guide property companies to install independent smoke and temperature alarm systems and simple sprinkler and fire reel facilities to improve fire early warning and disposal capabilities. Supervise property companies to carry out large-scale hidden dangers investigation and management, ensure that hidden dangers investigation is in place and rectification is thorough, and ensure the safety of the commercial market.
Verb (abbreviation for verb) job requirements
(1) Improve ideological understanding and strengthen organizational leadership. The special rectification of production safety in commercial market is an important work in the deployment of Xicheng street. All communities, local departments and members of the Safety Committee should attach great importance to it, strictly implement the responsibility of "territorial management", make careful arrangements, formulate implementation plans in combination with the actual situation in the jurisdiction, refine work measures, and clarify the responsibility for rectification. It should be included in the three-year special rectification of safety production, and open up "life channels" and "shared places" together with fire safety management in key industries.
(two) rectification in strict accordance with the law, enhance service awareness. All communities, local departments and members of safety committees should firmly establish the concept of "safety first" and "zero tolerance" for hidden dangers, adhere to the iron fist law enforcement and make full use of legal means. Where hidden dangers are concentrated and seriously threaten public safety, the office shall report to the competent department of industry to apply to the district government for listing supervision. At the same time, it is necessary to actively guide and help hidden danger units to formulate practical, economical and reasonable rectification measures, and maximize the organic unity of hidden danger management and optimization of business environment.
(3) Strengthen the application of achievements and establish a long-term mechanism. After the end of the special rectification, all communities, local departments and relevant units of the members of the Safety Committee should carefully sort out the hidden dangers in the trade market, organize multi-department consultation and judgment, and analyze the crux of the problem. The departments of commerce, market supervision and comprehensive administrative law enforcement should implement the industry supervision responsibilities, actively find shortcomings and weak links, formulate targeted preventive measures, and form a long-term supervision mechanism.
(4) Strengthen publicity and education and create supervision by public opinion. It is necessary to make full use of online media, announce the contents and requirements of rectification actions to the public, and carry out suggestive publicity on fire safety. Focus on exposing units and places with outstanding hidden dangers and long delays, forming a strong momentum of public opinion supervision.
(5) Strengthen follow-up and ask for effectiveness, and take strict reward and punishment measures. During the special rectification period, the Street Safety Committee will send a supervision team to comprehensively evaluate the development of relevant units in various communities, local departments and members of the Safety Committee by consulting account information and spot-checking units, and issue a special bulletin. The evaluation results will serve as an important basis for this year's safety assessment. Departments that are perfunctory, slow to advance, and go through the motions will be seriously investigated for responsibility.