Does the strong and weak current between each layer have any influence on human body?

Now basically every floor has strong electricity and weak electricity. Strong electricity refers to electricity greater than 220 volts, and the weaknesses that directly harm human body are some wires that are less than 220 volts and harmless to human body, such as telephone lines and network cables. However, whether it is strong electricity or weak electricity, there will be a strong electricity well and a weak electricity well on each floor of the community, which will have a certain radiation effect on the human body to a certain extent, so you must buy some radiation-proof materials when decorating.

Is there radiation in the high-voltage electricity room?

There will be some radiation between strong electricity, but the radiation level is very small, which has little impact on human health. Generally speaking, as long as there is an alternating electric field, there will be radiation, such as mobile phone electric field, electric field, signal electric field and so on, which are common in our lives, but these radiation will be relatively small and will not have any impact on our health.

Wiring principle

1, the wires used for wire routing must meet the requirements of specified standards. Generally speaking, household wires are all plastic sheathed wires, which are not only durable, but also have good insulation performance. However, when selecting the conductor, we must also consider whether its current-carrying operator meets its load requirements.

2. Try to avoid joints when wiring, and it is best to put the wire cloth on your head at one time. Because there are too many connectors, it will not only increase the resistance, but also reduce its insulation, laying a safety hazard for future use.

3. The basic principle of wire wiring is to be firm and beautiful after laying, which is the most basic principle. Generally speaking, lines placed horizontally and vertically will be stronger, and dark lines will be placed vertically. If you need to go through the wall when wiring, you should pay attention to protect the insulation layer of the conductor, otherwise it will be easily damaged.